top of page

Igla Alarm FAQ

HELP! I CAN'T DRIVE MY VEHICLE

To be able to drive your vehicle you need to get authorized. There are 3 ways to authorize. Either your PIN code you created using factory buttons in the interior, a key fob with a working battery, or a paired cell phone.

If the vehicle fails to start, turn the ignition off. Take a breath, wait 3 seconds, and turn the ignition back on. Then try your pin code again No need to open a door or wait for any extended period of time.

Double check the battery in your key fob, see battery help below. Open the Author ID app and turn key grey then turn the key orange, see how to pair phone below.

KNOW YOUR SERVICE BUTTON

To make any changes to your Igla system you will need to know your service button. Examples are cruise control on/off, tractions control, and cruise cancel

Text_us-removebg-preview.png

Examples:

Traction_Control_Light-1_edited_edited.p
cruise-control-icon-540x405_edited_edite
Cruise cancel.png

If you are unsure of what your service button is, please use the TEXT US button at the bottom right of our webpage.

KNOW HOW TO TURN THE IGNITION ON

Turn your ignition on, but don't start the engine
HOW TO: Foot must NOT be on the BRAKE while pressing your start button. To turn the ignition on it will be 1 of 3 ways.
1. Press start button 1 time
2. Press start button 2 times
3. Press and hold start button for 5 seconds
 

2x or Hold for 5 sec_edited_edited.png

How to change your pin code

How to enter service mode

How to pair your phone

How to exit service mode

How to delete paired phones

Battery help

How to use your emergency code

Igla simplified instructions

Author ID mobile app

bottom of page